VZ-VX1824-V2 – Unified Network Storage

VZ-VX1824-V2 – Unified Network Storage

Model No. VZ-VX1824-V2 Categories: ,

Overview

VZ-VX1824-V2 series storage, with high performance, high reliability, high density, high scalability and high usability, is a new-generation unified network storage developed especially for video
surveillance. Integrating a range of features such as iSCSI storage, RAID processing, permanent data protection and cutting-edge disk management technology, this device offers concurrent block
access performance (iSCSI) ,and thus to be a comprehensive solution to storage in video surveillance.

 

Intelligent RAID Engine (ISET)

• Convenient RAID application
The RAID can be used immediately after being created. The system automatically initializes at the background.

• Free from the impact of abnormal RAID status
The performance of storage devices usually deteriorates in the case of RAID degradation. The Intelligent RAID Engine technology can be a shield against the impact of abnormal RAID status
on services to ensure the normal operation of front-end monitoring services.

• Free from the influence of concurrent reading/writing
The IOPS multiplies when concurrent reading and writing occurs on a disk. The Intelligent RAID Engine technology can be a shield against the impact of video recording and playback to ensure
the normal operation of front-end services.

• Cache algorithms for videos
Optimized read/write cache management algorithm, greatly improving access performance and extending the lifespan of HDDs.

• SSD Cache
The use of SSD Cache can be greatly improving access performance of hot data.

• Dynamic adjustment of reconstruction speed
The system adjusts the reconstruction speed automatically based on the system conditions to reduce the impact of RAID reconstruction on services and to improve the effective utilization of
system resources.

Super Error Correction (SEC)

• Automatic disk inspection and repair
The unique hard disk fault-tolerant processing algorithm ensures service continuity even when multiple disk errors exist in the array. Faul sectors can also be automatically repaired.

• Fast disk reconstruction
Data can be copied to a hot spare disk within a short period. This substantially reduces the read I/O of disk, speeds up the reconstruction, and avoids data loss.

• RAID superblock backup
Array composition is not affected when data in a certain sector cannot be read. In addition, damaged data can be repaired by using the backup sector to improve array reliability.

Data Protection
• Data safe box
Online embedded UPS protection and data safe box are provided to ensure secure writing of cache data into data safe box at unexpected power-off without data loss.

• Disk pre-copying
Pre-detection of failure is implemented to transfer data from risky disk to the hot spare disk.

• Disk protection
Once a disk error is detected, the disk repair process would automatically start. Data in the failed disk is recalculated from other disk in the array to remap the bad blocks of disk.

• Link protection
Link aggregation and dynamic failover ensure the read/write bandwidth without affecting the availability of data channels.

Specifications

Controller 1
Performance Video Mode 512-channel (1024Mbps) recording,
512-channel (1024Mbps) forwording,
51-channel (102Mbps) playback
Performance IPSAN Mode 512-channel(1024Mbps) recording,
51-channel(102Mbps) playback
Storage controller Intel 64-bit multi-core processor
Memory 8 GB, up to 64 GB
Front-end Service Interface 5-port 10/100/1000 Mbps Ethernet interface
4-port 10/100/1000 Mbps Ethernet interface module (optional)
2-port 10 GE SFP+ interface module (optional)
4-port 10 GE SFP+ interface module (optional)
Back-end Expansion Interface 2-port 4*12 Gbps Mini SAS HD
Host Connection Up to 1024
HDD 24 SATA interfaces
Disk Capacity 1 TB, 2 TB, 3 TB, 4 TB , 5 TB, 6 TB, 8 TB , 10 TB, 12 TB, 14 TB , 16 TB, 18 TB
RAID JBOD and RAID 0,1,10, 5, 50,6
Dedicated hot-spare disk and global hot-spare disk
Maximum Number of Logic Resources 1024
Protocol Supported iSCSI, NFS, SMB, FTP
Alarm Feature Indicator alarm, beep alarm, mail alarm, SNMP Trap alarm, and short message alarm
Operating System Windows and Linux
Power Supply 1 default, 1 optional
Battery at least 1
Dimension (H ×W×D) Controller enclosure: 175.0mm×481.6mm×589.0mm
Power Consumption Controller enclosure :< 350 W (fully configured)
Power Supply 100 V – 127 V/ 200 V – 240 V AC, 60 Hz/50 Hz
Weight Controller enclosure: Fully configured: < 43 kg
Authentication certificate CE, FCC, UL
Operating temperature 5 °C~40°C / 41 °F ~ 104 °F, (10°C~ 35°C / 50 °F ~ 95°F Recommended)

Where to Buy This Product

FPC Security

Full Protection – Latin America Distributor

Colombia Office: Calle 102A # 47A – 42, Bogotá – Colombia
Phone Support: (+571) 580-1844
Telephone Service Hours: Mon-Fri 8:00am – 5:00pm

Miami Office: 10025 NW 116 Way Suite #12 Medley, Fl, 33172 USA
Phone Support: (305) 885-6225
Fax: (305) 885-7245
Telephone Service Hours: Mon-Fri 8:00am – 5:00pm CST, US Time

Email: sales@full-protection.com
Website: www.full-protection.com

FPC Security

FPC is the North American Distributor

Office: 10025 NW 116 Way Suite #12 Medley, Fl, 33172 USA
Email: sales@fpc-security.com
Website: www.fpc-security.com
Phone Support: 1-888-504-3318
Service Hours: Mon – Fri: 8.00am to 5.00pm EST